Module 1: Introduction to Continuous Monitoring Systems (CMS)
Module Description: Introduce the fundamentals of compliance demonstrations using Continuous Monitoring Systems (CMS) from the various types of hardware and software solutions to the processes and structures that facilities used to generate valid CMS data. The primary objective of Module No. 1 is to provide the building blocks for a successful CMS program. This foundation will be used in subsequent training modules as part of this webinar series for an audience of various degrees of expertise in CMS. AGENDA
Facilitator: Eric Swisher – All4 Inc., Technical Manager
Module 2: Good vs. Bad Continuous Monitoring System (CMS) Data
Module Description: Describe how good data (used for compliance purposes) is generated by a CMS. The focus will be on the relationship of various quality assurance and quality control (QA/QC) procedures on data quality. Module No. 2 will build on the concepts established in Module No 1.
Facilitator: Amanda Essner – All4 Inc., Consulting Scientist
Module 3: Compliance Demonstration (Data Averaging & Validation)
Module Description: Describe how good CMS data goes from collection to compliance demonstration. The focus will be on the relationship between the regulatory requirements, interpretations, gray areas, and the compliance demonstrations. Module No. 3 will build on the concepts established in Module Nos. 1 & 2.
Facilitator: Sean Cunningham – All4 Inc., Consulting Engineer
Module 4: Reporting of Continuous Monitoring System (CMS) Data
Module Description: Introduce the process by which compliance demonstrations are reported using CMS data and how those reports should be reviewed. Module No. 4 will be the end result to the items discussed in Module Nos. 1 – 3 and will be the information seen by the regulating agency.
Facilitator: Kayla Turney – All4 Inc., Consulting Engineer